PUBLIKATIONEN – CDP | Austrian Center for Digital Production

2025
2024
2023
2022
2021
2020
2019
2018

Get [BibTeX] of all listed publications, or download for individual years.

2025 [BibTeX]

[1]: Rudolf Ramler, Philipp Straubinger, Reinhold Plösch, Dietmar Winkler, “Poster: Unit Testing Past vs. Present: Examining LLMs‘ Impact on Defect Detection and Efficiency,” in 2025 IEEE Conference on Software Testing, Verification and Validation (ICST), Napoli, Italy, , pp. 733-736, doi: 10.1109/ICST62969.2025.10988960. Available: https://ieeexplore.ieee.org/document/10988960/.
[2]: , “Balancing Software Innovation and Regulatory Compliance: 17th International Conference on Software Quality, SWQD 2025, Munich, Germany, May 20–22, 2025, Proceedings,” vol. 544, Cham, 2025. Available: https://link.springer.com/10.1007/978-3-031-89277-6.

2024 [BibTeX]

[1]: Dietmar Winkler, Kristof Meixner, Richard Mordinyi, Stefan Biffl, “Modellunterstützte Qualitätssicherung von Engineering-Daten industrieller Produktionssysteme,” Berlin, Heidelberg, 2024, pp. 875-907. Available: https://link.springer.com/10.1007/978-3-662-58528-3_89.
[2]: Stefan Biffl, Dietmar Winkler, Lukas Kathrein, Felix Rinker, Richard Mordinyi, Heinrich Steininger, “Prozessunterstützung für modellorientiertes Engineering von CPPS von der Konzeptphase bis zur virtuellen Inbetriebnahme: Bedarfe und Lösungsansätze,” Berlin, Heidelberg, 2024, pp. 787-825. Available: https://link.springer.com/10.1007/978-3-662-58528-3_88.
[3]: Hossein Rahmani, Stefan Biffl, Kristof Meixner, David Hoffmann, Arndt Lüder, Dietmar Winkler, “Business Risk Analysis of Production Variants Considering Technical Dependencies,” in 2024 26th International Conference on Business Informatics (CBI), Vienna, Austria, , pp. 178-187, doi: 10.1109/CBI62504.2024.00029. Available: https://ieeexplore.ieee.org/document/10801238/.
[4]: David Hoffmann, Ranjitkumar Gudder, Paula Hünecke, Arndt Lüder, “Enhancing Production System Conceptualization with PPR Modeling,” in 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), Padova, Italy, , pp. 1-8, doi: 10.1109/ETFA61755.2024.10710662. Available: https://ieeexplore.ieee.org/document/10710662/.
[5]: Kevin Hansch, Arndt Lüder, David Hoffmann, “Development of PPR-based Basic Elements for Methodical Combination to Generalist Product Twins in Basic Engineering for SME,” in 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), Padova, Italy, , pp. 1-8, doi: 10.1109/ETFA61755.2024.10711070. Available: https://ieeexplore.ieee.org/document/10711070/.
[6]: Arndt Lüder, Miriam Schleipen, David Hoffmann, Jan Blume, Matthias Freund, Pooja Gupta, “Realizing Consistent Digital Twins by Combining Different Data Exchange Technologies,” in 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), Padova, Italy, , pp. 1-8, doi: 10.1109/ETFA61755.2024.10711018. Available: https://ieeexplore.ieee.org/document/10711018/.
[7]: Arndt Lüder, David Hoffmann, Stefan Biffl, Kristof Meixner, “Identifying Required Knowledge for Production System Digitalization Projects,” in 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), Padova, Italy, , pp. 1-6, doi: 10.1109/ETFA61755.2024.10710645. Available: https://ieeexplore.ieee.org/document/10710645/.
[8]: Ranjitkumar Gudder, David Hoffmann, Paula Hünecke, Arndt Lüder, “Integrated Engineering Data Transformation: An AutomationML-Based Approach for Efficient Data Exchange,” in 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), Padova, Italy, , pp. 01-04, doi: 10.1109/ETFA61755.2024.10710965. Available: https://ieeexplore.ieee.org/document/10710965/.
[9]: David Hoffmann, Prerna Juhlin, Ranjitkumar Gudder, Arndt Lüder, “Towards a JSON-Serialization for AutomationML,” in 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), Padova, Italy, , pp. 01-04, doi: 10.1109/ETFA61755.2024.10711129. Available: https://ieeexplore.ieee.org/document/10711129/.
[10]: David Hoffmann, Arndt Lüder, Stefan Biffl, “Operator-integrated cluster analysis for production quality control,” IFAC-PapersOnLine, vol. 58, 2024, pp. 1288-1293, doi: 10.1016/j.ifacol.2024.09.067. Available: https://linkinghub.elsevier.com/retrieve/pii/S2405896324014629.
[11]: Kevin Hansch, Arndt Lüder, David Hoffmann, “Towards Optimization Methods for Order Data Management: A Case Study of a Medium-Sized Special Purpose Machinery Manufacturer,” IFAC-PapersOnLine, vol. 58, 2024, pp. 121-126, doi: 10.1016/j.ifacol.2024.09.111. Available: https://linkinghub.elsevier.com/retrieve/pii/S2405896324015192.
[12]: Arndt Lüder, Jan Blume, Miriam Schleipen, Matthias Freund, David Hoffmann, Pooja Gupta, “Integration verschiedener Informationstechnologien in der Verwaltungsschale am Beispiel von AAS und AutomationML,” 2024, doi: 10.25673/116043. Available: https://opendata.uni-halle.de//handle/1981185920/117999.
[13]: Kristof Meixner, David Hoffmann, Sarah Riedmann, Paula Hünecke, Christoph Binder, “Rolling the Dice – Rethinking the RAMI 4.0 Perspectives,” in 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), Padova, Italy, , pp. 1-8, doi: 10.1109/ETFA61755.2024.10711108. Available: https://ieeexplore.ieee.org/document/10711108/.
[14]: Kristof Meixner, Kevin Feichtinger, Hafiyyan Sayyid Fadhlillah, Sandra Greiner, Hannes Marcher, Rick Rabiser, Stefan Biffl, “Variability modeling of products, processes, and resources in cyber–physical production systems engineering,” Journal of Systems and Software, vol. 211, , p. 112007, doi: 10.1016/j.jss.2024.112007. Available: https://linkinghub.elsevier.com/retrieve/pii/S0164121224000505.
[15]: Arndt Luder, David Hoffmann, Ranjitkumar Gudder, Stefan Biffl, Kristof Meixner, “Representing Property Dependencies within AutomationML Based Digital Twins,” in 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), Padova, Italy, , pp. 01-04, doi: 10.1109/ETFA61755.2024.10710983. Available: https://ieeexplore.ieee.org/document/10710983/.
[16]: Michael Vierhauser, Kristof Meixner, Stefan Biffl, “Scenario-Based Field Testing of Drone Missions,” in Euromicro Software Engineering and Advanced Applications (SEAA), Paris, France, 2024.
[17]: Kabul Kurniawan, Elmar Kiesling, Andreas Ekelhart, “CyKG-RAG: Towards knowledge-graph enhanced retrieval augmented generation for cybersecurity,” in RAGE-KG 2024 Workshop at ISWC 2024, Baltimore, Maryland, USA, .
[18]: Kabul Kurniawan, Elmar Kiesling, Dietmar Winkler, Andreas Ekelhart, “The ICS-SEC KG: An Integrated Cybersecurity Resource for Industrial Control Systems,” vol. 15233, Cham, 2025, pp. 153-170. Available: https://link.springer.com/10.1007/978-3-031-77847-6_9.
[19]: Simon Raedler, Luca Berardinelli, Karolin Winter, Abbas Rahimi, Stefanie Rinderle-Ma, “Bridging MDE and AI: a systematic review of domain-specific languages and model-driven practices in AI software systems engineering,” Software and Systems Modeling, , doi: 10.1007/s10270-024-01211-y. Available: https://link.springer.com/10.1007/s10270-024-01211-y.
[20]: Juergen Mangler, Ronny Seiger, Janik-Vasily Benzin, Joscha Grüger, Yusuf Kirikkayis, Florian Gallik, Lukas Malburg, Matthias Ehrendorfer, Yannis Bertrand, Marco Franceschetti, Barbara Weber, Stefanie Rinderle-Ma, Ralph Bergmann, Estefanía Serral Asensio, Manfred Reichert, “From Internet of Things Data to Business Processes: Challenges and a Framework,” , doi: 10.48550/arXiv.2405.08528. Available: http://arxiv.org/abs/2405.08528.
[21]: Simon Raedler, Matthias Rupp, Eugen Rigger, Stefanie Rinderle-Ma, “Code Generation for Machine Learning using Model-Driven Engineering and SysML,” 2024, doi: 10.18420/modellierung2024_019. Available: http://arxiv.org/abs/2307.05584.
[22]: Beate Wais, Stefanie Rinderle-Ma, “Towards a Comprehensive Evaluation of Decision Rules and Decision Mining Algorithms Beyond Accuracy,” in Advanced Information Systems Engineering, Cham, 2024, pp. 403-419, doi: 10.1007/978-3-031-61057-8_24.
[23]: Bernhard Oberegger, Christian Truden, Markus Brillinger, Florian Pauker, Gerald Reiner, “Evaluating the Viability of Reusable Packaging in a Circular Economy B2B Framework,” in EurOMA 2024, Barcelona, Spain, 2024.
[24]: Gerta Kapllani, Gerald Reiner, Elisabeth Zehendner, Emel Arikan, Sebastian Kropatschek, Dietmar Winkler, “Parcel Demand Forecasting for a multi-customer Postal Service,” in 23rd International Working Seminar on Production Economics (IWSPE), Innsbruck, Austria, 2024.
[25]: Stefan Biffl, Sebastian Kropatschek, Kristof Meixner, David Hoffmann, Arndt Lüder, “Configuring and Validating Multi-aspect Risk Knowledge for Industry 4.0 Information Systems,” vol. 14663, Cham, , pp. 492-508. Available: https://link.springer.com/10.1007/978-3-031-61057-8_29.
[26]: , “Software Quality as a Foundation for Security: 16th International Conference on Software Quality, SWQD 2024, Vienna, Austria, April 23–25, 2024, Proceedings,” vol. 505, Cham, 2024. Available: https://link.springer.com/10.1007/978-3-031-56281-5.
[27]: Christian Nigischer, Florian Reiterer, Sébastien Bougain, Manfred Grafinger, “Self-optimising Digital Factory Twin: An industrial use case,” in 18th International Design Conference (DESIGN 2024), vol. 4: DESIGN 2024, Cavtat – Dubrovnik, Croatia, , pp. 2159-2168, doi: 10.1016/j.procir.2023.02.192. Available: https://www.cambridge.org/core/journals/proceedings-of-the-design-society/article/selfoptimizing-digital-factory-twin-an-industrial-use-case/78FC261BE0DDD0C9E55E77A58A5A94D8.
[28]: Dietmar Winkler, Pirmin Urbanke, Rudolf Ramler, “Investigating the readability of test code,” Empirical Software Engineering, vol. 29, , p. 53, doi: 10.1007/s10664-023-10390-z. Available: https://link.springer.com/10.1007/s10664-023-10390-z.
[29]: Simon Raedler, Matthias Rupp, Eugen Rigger, Stefanie Rinderle-Ma, “Model-Driven Engineering for Machine Learning Code Generation using SysML,” in Modellierung 2024, vol. P348, Potsdam, , pp. 197-212, doi: 10.18420/modellierung2024_019. Available: https://dl.gi.de/items/37f28109-ca9c-44b1-8da4-5cd2a0ad12c9.
[30]: Diana Strutzenberger, Juergen Mangler, Stefanie Rinderle-Ma, “Evaluating BPMN Extensions for Continuous Processes Based on Use Cases and Expert Interviews,” Business & Information Systems Engineering, , doi: 10.1007/s12599-023-00850-7. Available: https://link.springer.com/10.1007/s12599-023-00850-7.

2023 [BibTeX]

[1]: Franz Krause, Kabul Kurniawan, Elmar Kiesling, Heiko Paulheim, Axel Polleres, “On the Representation of Dynamic BPMN Process Executions in Knowledge Graphs,” vol. 14382, Cham, 2023, pp. 97-105. Available: https://link.springer.com/10.1007/978-3-031-47745-4_8.
[2]: Sebastian Kropatschek, Siegfried Hollerer, David Hoffman, Dietmar Winkler, Arndt Lüder, Thilo Sauter, Wolfgang Kastner, Stefan Biffl, “Combining Models for Safety and Security Concerns in Automating Digital Production,” .
[3]: Pablo Gutiérrez Peón, Paraskevas Karachatzis, Wilfried Steiner, Elisabeth Uhlemann, “Time-Sensitive Networking’s Scheduled Traffic Implementation on IEEE 802.11 COTS Devices,” in 2023 IEEE 29th International Conference on Embedded and Real-Time Computing Systems and Applications (RTCSA), , pp. 167-175, doi: 10.1109/RTCSA58653.2023.00028. Available: https://www.computer.org/csdl/proceedings-article/rtcsa/2023/378600a167/1RLXKL6doeA.
[4]: Christoph Lehr, Patrick Denzler, Thomas Frühwirth, Wolfgang Kastner, “Buffer Management for TSN-Enabled End Stations,” in 2023 IEEE 19th International Conference on Factory Communication Systems (WFCS), 2023, p. 1–8, doi: 10.1109/WFCS57264.2023.10144243. Available: https://ieeexplore.ieee.org/abstract/document/10144243/.
[5]: Philipp Stadler, Reinhold Plösch, Rudolf Ramler, “Applying a Genetic Algorithm for Test Suite Reduction in Industry,” vol. 472, Cham, 2023, pp. 63-83. Available: https://link.springer.com/10.1007/978-3-031-31488-9_4.
[6]: Jorge Martinez-Gil, Thomas Hoch, Mario Pichler, Bernhard Heinzl, Bernhard Moser, Kabul Kurniawan, Elmar Kiesling, Franz Krause, “Examining the Adoption of Knowledge Graphs in the Manufacturing Industry: A Comprehensive Review,” Cham, 2024, pp. 55-70. Available: https://link.springer.com/10.1007/978-3-031-46452-2_4.
[7]: S. Karch, A. Lüder, C. Listl, N.S. Nowacki, K. Hassan, R. Werner, T. Hohmann, S. Müller, “Lean Engineering – Identifying waste in engineering chains,” Procedia CIRP, vol. 120, 2023, pp. 463-468, doi: 10.1016/j.procir.2023.09.020. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827123007527.
[8]: Fabian Stoop, Josef Mayr, Clemens Sulz, Petr Kaftan, Friedrich Bleicher, Kazuo Yamazaki, Konrad Wegener, “Cloud-based thermal error compensation with a federated learning approach,” Precision Engineering, vol. 79, , pp. 135-145, doi: 10.1016/j.precisioneng.2022.09.013. Available: https://linkinghub.elsevier.com/retrieve/pii/S0141635922002173.
[9]: Gernot Pöchgraber, Sébastien Bougain, Bernhard Wallner, Gerold Bohaty, Thomas Trautner, Friedrich Bleicher, “Introduction of a Digital Twin for the Product Development Phase,” in 2023 International Conference on Engineering Management of Communication and Technology (EMCTECH), Vienna, Austria, , pp. 1-6, doi: 10.1109/EMCTECH58502.2023.10297012. Available: https://ieeexplore.ieee.org/document/10297012/.
[10]: Bernhard Wallner, Benedikt Zwölfer, Thomas Trautner, Friedrich Bleicher, “Digital Twin Development and Operation of a Flexible Manufacturing Cell using ISO 23247,” Procedia CIRP, vol. 120, 2023, pp. 1149-1154, doi: 10.1016/j.procir.2023.09.140. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827123008727.
[11]: Syed Juned Ali, Jan Michael Laranjo, Dominik Bork, “A Generic and Customizable Genetic Algorithms-Based Conceptual Model Modularization Framework,” vol. 14367, Cham, 2024, pp. 39-57. Available: https://link.springer.com/10.1007/978-3-031-46587-1_3.
[12]: Arndt Lüder, Heinrich Steininger, Dieter Goltz, “Quo vadis Automation?: Trends für das Engineering von Automatisierungssystemen,” at – Automatisierungstechnik, vol. 71, , pp. 6-15, doi: 10.1515/auto-2022-0102. Available: https://www.degruyter.com/document/doi/10.1515/auto-2022-0102/html.
[13]: Natalie Samanta Nowacki, Ralph Klaus Mueller, Daniel Grossmann, Arndt Lueder, “Approach for identifying data usage information objects for the later implementation in production environments: Enabling a logic for the information modelling based on use cases using a conversation concept,” in ICIEA-EU 2023: 2023 The 10th International Conference on Industrial Engineering and Applications, Rome Italy, , pp. 169-175, doi: 10.1145/3587889.3587915. Available: https://dl.acm.org/doi/10.1145/3587889.3587915.
[14]: David Hoffmann, Natalie Nowacki, Stefan Biffl, Elmar Kiesling, Kristof Meixner, Arndt Lüder, “Interdisciplinary Production Risk Exploration: A Grounded Approach to Integrate Data- and Knowledge-Driven Analytics,” Procedia CIRP, vol. 120, 2023, pp. 1016-1021, doi: 10.1016/j.procir.2023.09.117. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827123008491.
[15]: Stefan Biffl, Kristof Meixner, David Hoffmann, Dietmar Winkler, Arndt Lüder, “Towards Test-Driven Performance Validation of a Flexible Cyber-Physical Production System,” in 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), Sinaia, Romania, , pp. 1-4, doi: 10.1109/ETFA54631.2023.10275573. Available: https://ieeexplore.ieee.org/document/10275573/.
[16]: David Hoffmann, Arndt Lüder, Rene Weidlinger, Stefan Biffl, “Integrated Production Quality and Security Analysis,” in 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), Sinaia, Romania, , pp. 1-8, doi: 10.1109/ETFA54631.2023.10275588. Available: https://ieeexplore.ieee.org/document/10275588/.
[17]: David Hoffmann, Paula Huenecke, Arndt Lueder, Stefan Biffl, “Towards Case-Based Reuse of FMEA Models for Complex Production Systems,” in 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), Sinaia, Romania, , pp. 1-4, doi: 10.1109/ETFA54631.2023.10275550. Available: https://ieeexplore.ieee.org/document/10275550/.
[18]: Matthias Eckhart, Andreas Ekelhart, Stefan Biffl, Arndt Lüder, Edgar Weippl, “QualSec: An Automated Quality-Driven Approach for Security Risk Identification in Cyber-Physical Production Systems,” IEEE Transactions on Industrial Informatics, vol. 19, , pp. 5870-5881, doi: 10.1109/TII.2022.3193119. Available: https://ieeexplore.ieee.org/document/9837433/.
[19]: Arndt Lüder, David Hoffmann, Kristof Meixner, Paula Hünecke, Stefan Biffl, “Consistent Extension of Networks of Digital Representations of Production System Assets,” in 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), Sinaia, Romania, , pp. 1-4, doi: 10.1109/ETFA54631.2023.10275688. Available: https://ieeexplore.ieee.org/document/10275688/.
[20]: Matthias Ehrendorfer, Juergen Mangler, Stefanie Rinderle-Ma, “Clustering Raw Sensor Data in Process Logs to Detect Data Streams,” in Cooperative Information Systems, Cham, , pp. 438-447, doi: 10.1007/978-3-031-46846-9_25.
[21]: Alexander Raschendorfer, Thomas Frühwirth, “IoPT integration on the factory floor: a case study,” it – Information Technology, vol. 65, , pp. 102-112, doi: 10.1515/itit-2023-0005. Available: https://www.degruyter.com/document/doi/10.1515/itit-2023-0005/html.
[22]: Nataliia Klievtsova, Marcel Fuschlberger, “Design of an IoPT approach to create a cocktail robot station with robotic arm: components, interfaces and control,” it – Information Technology, vol. 65, , pp. 91-101, doi: 10.1515/itit-2023-0006. Available: https://www.degruyter.com/document/doi/10.1515/itit-2023-0006/html.
[23]: Sebastian Kropatschek, Kabul Kurniawan, Pusparaj Bhosale, Siegfried Hollerer, Elmar Kiesling, Dietmar Winkler, “Towards A Knowledge Graph-based Framework for Integrated Security and Safety Analysis in Digital Production Systems,” in 22nd International Semantic Web Conference {(ISWC}, vol. 3632, Athens, Greece, 2023, pp. 1-5. Available: https://ceur-ws.org/Vol-3632/ISWC2023_paper_485.pdf.
[24]: Syed Juned Ali, Giancarlo Guizzardi, Dominik Bork, “Enabling Representation Learning in Ontology-Driven Conceptual Modeling Using Graph Neural Networks,” vol. 13901, Cham, 2023, pp. 278-294. Available: https://link.springer.com/10.1007/978-3-031-34560-9_17.
[25]: Dominik Bork, Syed Juned Ali, Georgi Milenov Dinev, “AI-Enhanced Hybrid Decision Management,” Business & Information Systems Engineering, vol. 65, , pp. 179-199, doi: 10.1007/s12599-023-00790-2. Available: https://link.springer.com/10.1007/s12599-023-00790-2.
[26]: Siegfried Hollerer, Wolfgang Kastner, Thilo Sauter, “Safety and Security: A Field of Tension in Industrial Practice,” in 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), Lemgo, Germany, , pp. 1-7, doi: 10.1109/INDIN51400.2023.10217900. Available: https://ieeexplore.ieee.org/document/10217900/.
[27]: Stefan Biffl, David Hoffmann, Elmar Kiesling, Kristof Meixner, Arndt Lüder, Dietmar Winkler, “Validating Production Test Scenarios with Cyber-Physical System Design Models,” in 2023 IEEE 25th Conference on Business Informatics (CBI), Prague, Czech Republic, , pp. 1-10, doi: 10.1109/CBI58679.2023.10187499. Available: https://ieeexplore.ieee.org/document/10187499/.
[28]: Clemens Schwaiger, Thomas Trautner, Friedrich Bleicher, “Energy-Cost-Optimized Strategies for Discrete Mechanical Manufacturing,” Procedia CIRP, vol. 118, 2023, pp. 1022-1027, doi: 10.1016/j.procir.2023.06.175. Available: https://linkinghub.elsevier.com/retrieve/pii/S221282712300402X.
[29]: Gernot Pöchgraber, Sébastien Bougain, Thomas Trautner, Niphon Jeepjua, Friedrich Bleicher, “Digital Twin Preparation for the Prototyping Phase, a Use Case,” in Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, , pp. 735-742, doi: 10.1007/978-3-031-34821-1_80. Available: https://link.springer.com/chapter/10.1007/978-3-031-34821-1_80.
[30]: Gernot Pöchgraber, Sébastien Bougain, Thomas Trautner, Niphon Jeepjua, Gerold Bohaty, Friedrich Bleicher, “Design of a Multi-Fidelity Methodology for logistics process planning and Digital Twin integration in the early phases of product development,” in 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2022), vol. 118, , pp. 86-91, doi: 10.1016/j.procir.2023.06.016. Available: https://www.sciencedirect.com/science/article/pii/S221282712300238X.
[31]: Felix Rinker, Sebastian Kropatschek, Thorsten Steuer, Elmar Kiesling, Kristof Meixner, Laura Waltersdorfer, Patrik Sommer, Arndt Lüder, Dietmar Winkler, Stefan Biffl, “Multi-view FMEA Re-validation: Efficient Risk and Engineering Knowledge Integration in Agile Production Systems Engineering,” vol. 1708, Cham, 2023, pp. 60-83. Available: https://link.springer.com/10.1007/978-3-031-38821-7_4.
[32]: Simon Rädler, Matthias Rupp, Eugen Rigger, Stefanie Rinderle-Ma, “Code Generation for Machine Learning using Model-Driven Engineering and SysML,” , doi: 10.48550/arXiv.2307.05584. Available: https://arxiv.org/abs/2307.05584.
[33]: Simon Rädler, Jürgen Mangler, Stefanie Rinderle-Ma, “Model-Driven Engineering Method to Support the Formalization of Machine Learning using SysML,” , doi: 10.48550/arXiv.2307.04495. Available: https://arxiv.org/abs/2307.04495.
[34]: Simon Rädler, Luca Berardinelli, Karolin Winter, Abbas Rahimi, Stefanie Rinderle-Ma, “Model-Driven Engineering for Artificial Intelligence — A Systematic Literature Review,” , doi: 10.48550/arXiv.2307.04599. Available: https://arxiv.org/abs/2307.04599.
[35]: Christian Nigischer, Florian Reiterer, Sébastien Bougain, Manfred Grafinger, “Finding the proper level of detail to achieve sufficient model fidelity using FlexSim: An industrial use case,” in 33rd CIRP Design Conference 2023 (CIRP Design 2023), vol. 119, Sydney, , pp. 1240-1245, doi: 10.1016/j.procir.2023.02.192. Available: https://www.sciencedirect.com/science/article/pii/S2212827123006455.
[36]: Beate Scheibel, Stefanie Rinderle-Ma, “An End-to-End Approach for Online Decision Mining and Decision Drift Analysis in Process-Aware Information Systems: Extended Version,” . Available: http://arxiv.org/abs/2303.03961.
[37]: Markus Brillinger, Marcel Wuwer, Benjamin Smajic, Muaaz Abdul Hadi, Stefan Trabesinger, Bernhard Oberegger, Markus Jäger, “Novel method to predict the energy consumption of machined parts in the design phase to attain sustainability goals,” Journal of Manufacturing Processes, vol. 101, , pp. 1046-1054, doi: 10.1016/j.jmapro.2023.05.086. Available: https://linkinghub.elsevier.com/retrieve/pii/S1526612523005704.
[38]: Janik-Vasily Benzin, Gyunam Park, Stefanie Rinderle-Ma, “Preventing Object-centric Discovery of Unsound Process Models for Object Interactions with Loops in Collaborative Systems: Extended Version,” . Available: http://arxiv.org/abs/2303.16680.
[39]: Nataliia Klievtsova, Janik-Vasily Benzin, Timotheus Kampik, Juergen Mangler, Stefanie Rinderle-Ma, “Conversational Process Modelling: State of the Art, Applications, and Implications in Practice,” . Available: http://arxiv.org/abs/2304.11065.
[40]: Juergen Mangler, Joscha Grüger, Lukas Malburg, Matthias Ehrendorfer, Yannis Bertrand, Janik-Vasily Benzin, Stefanie Rinderle-Ma, Estefania Serral Asensio, Ralph Bergmann, “DataStream XES Extension: Embedding IoT Sensor Data into Extensible Event Stream Logs,” Future Internet, vol. 15, , p. 109, doi: 10.3390/fi15030109. Available: https://www.mdpi.com/1999-5903/15/3/109.
[41]: Beate Scheibel, Stefanie Rinderle-Ma, “An End-to-End Approach for Online Decision Mining and Decision Drift Analysis in Process-Aware Information Systems,” in Intelligent Information Systems, Cham, 2023, pp. 17-25, doi: 10.1007/978-3-031-34674-3_3.
[42]: Clemens Schwaiger, Thomas Trautner, Friedrich Bleicher, “Load Profile Optimization Using Electricity Wholesale Market Price Data for Discrete Manufacturing,” Cham, 2023, pp. 508-516. Available: https://link.springer.com/10.1007/978-3-031-28839-5_57.
[43]: Diana Strutzenberger, Martin Kunz, Lisa Magdalena Schuster, Juergen Mangler, Ronald Hinterbichler, “An IoT architecture to integrate different machine tools into a compound OPC UA interface,” it – Information Technology, , doi: 10.1515/itit-2023-0007. Available: https://www.degruyter.com/document/doi/10.1515/itit-2023-0007/html.
[44]: , “Software Quality: Higher Software Quality through Zero Waste Development: 15th International Conference, SWQD 2023, Munich, Germany, May 23-25, 2023, Proceedings,” vol. 472, Cham, 2023. Available: https://link.springer.com/10.1007/978-3-031-31488-9.
[45]: Felix Rinker, Laura Waltersdorfer, Kristof Meixner, Dietmar Winkler, Arndt Lüder, Stefan Biffl, “Traceable Multi-view Model Integration: A Transformation Pipeline for Agile Production Systems Engineering,” SN Computer Science, vol. 4, , p. 205, doi: 10.1007/s42979-022-01572-5. Available: https://link.springer.com/10.1007/s42979-022-01572-5.
[46]: Kristof Meixner, Felix Rinker, Laura Waltersdorfer, Arndt Lüder, Stefan Biffl, “Organizing reuse for production systems engineering with capabilities and skills: Organisation der Wiederverwendung im Engineering von Produktionsystemen mit Capabilities und Skills,” at – Automatisierungstechnik, vol. 71, , pp. 116-127, doi: 10.1515/auto-2022-0120. Available: https://www.degruyter.com/document/doi/10.1515/auto-2022-0120/html.
[47]: Stefanie Rinderle-Ma, Karolin Winter, Janik-Vasily Benzin, “Predictive compliance monitoring in process-aware information systems: State of the art, functionalities, research directions,” Information Systems, , p. 102210, doi: 10.1016/j.is.2023.102210. Available: https://www.sciencedirect.com/science/article/pii/S0306437923000467.
[48]: Eugen Rigger, Simon Rädler, Tino Stankovic, “Integrating Computational Design Support in Model-Based Systems Engineering Using Model Transformation,” in IFIP International Conference on Product Lifecycle Management, vol. 667, Grenoble, France, , pp. 186-195, doi: 10.1007/978-3-031-25182-5_19. Available: https://link.springer.com/chapter/10.1007/978-3-031-25182-5_19.
[49]: Janik-Vasily Benzin, Stefanie Rinderle-Ma, “A Survey on Event Prediction Methods from a Systems Perspective: Bringing Together Disparate Research Areas,” . Available: http://arxiv.org/abs/2302.04018.
[50]: Alexandra Mazak-Huemer, Manuel Wimmer, Christian Huemer, Bernhard Wally, Thomas Frühwirth, Wolfgang Kastner, “Rahmenwerk zur modellbasierten horizontalen und vertikalen Integration von Standards für Industrie 4.0,” Berlin, Heidelberg, 2023, pp. 1-24. Available: https://doi.org/10.1007/978-3-662-45537-1_94-2.

2022 [BibTeX]

[1]: Philipp-Lorenz Glaser, Syed Juned Ali, Emanuel Sallinger, Dominik Bork, “Model-Based Construction of Enterprise Architecture Knowledge Graphs,” vol. 13585, Cham, 2022, pp. 57-73. Available: https://link.springer.com/10.1007/978-3-031-17604-3_4.
[2]: Philipp-Lorenz Glaser, Syed Juned Ali, Emanuel Sallinger, Dominik Bork, “Exploring Enterprise Architecture Knowledge Graphs in Archi: The EAKG Toolkit,” vol. 466, Cham, 2023, pp. 332-338. Available: https://link.springer.com/10.1007/978-3-031-26886-1_21.
[3]: Andreas Fend, Dominik Bork, “CPSA _ML: a language and code generation framework for digital twin based monitoring of mobile cyber-physical systems,” in MODELS ’22: ACM/IEEE 25th International Conference on Model Driven Engineering Languages and Systems, Montreal Quebec Canada, , pp. 649-658, doi: 10.1145/3550356.3563134. Available: https://dl.acm.org/doi/10.1145/3550356.3563134.
[4]: Giuliano De Carlo, Philip Langer, Dominik Bork, “Advanced visualization and interaction in GLSP-based web modeling: realizing semantic zoom and off-screen elements,” in MODELS ’22: ACM/IEEE 25th International Conference on Model Driven Engineering Languages and Systems, Montreal Quebec Canada, , pp. 221-231, doi: 10.1145/3550355.3552412. Available: https://dl.acm.org/doi/10.1145/3550355.3552412.
[5]: Florian Cesal, Dominik Bork, “Establishing Interoperability Between the EMF and the MSDKVS Metamodeling Platforms,” vol. 456, Cham, 2022, pp. 167-182. Available: https://link.springer.com/10.1007/978-3-031-21488-2_11.
[6]: Robin Bråtfors, Simon Hacks, Dominik Bork, “Historization of Enterprise Architecture Models via Enterprise Architecture Knowledge Graphs,” vol. 456, Cham, 2022, pp. 51-65. Available: https://link.springer.com/10.1007/978-3-031-21488-2_4.
[7]: Ali, Syed Juned, “Knowledge Graph-based Conceptual Models Search,” in International Conference on Conceptual Modeling, Hyerabad, India, 2022, pp. 1-10. Available: https://ceur-ws.org/Vol-3211/CR_100.pdf.
[8]: Felix Rinker, Kristof Meixner, Sebastian Kropatschek, Elmar Kiesling, Stefan Biffl, “Risk and Engineering Knowledge Integration in Cyber-physical Production Systems Engineering,” in 2022 48th Euromicro Conference on Software Engineering and Advanced Applications (SEAA), Gran Canaria, Spain, , pp. 338-345, doi: 10.1109/SEAA56994.2022.00060. Available: https://ieeexplore.ieee.org/document/10011513/.
[9]: Matthias Eckhart, Andreas Ekelhart, Stefan Biffl, Arndt Lüder, Edgar Weippl, “QualSec: An Automated Quality-Driven Approach for Security Risk Identification in Cyber-Physical Production Systems,” IEEE Transactions on Industrial Informatics, vol. 19, , pp. 5870-5881, doi: 10.1109/TII.2022.3193119. Available: https://ieeexplore.ieee.org/document/9837433/.
[10]: Kevin Feichtinger, Kristof Meixner, Stefan Biffl, Rick Rabiser, “Online Appendix for Evolution Support for Custom Variability Artifacts using Feature Models: A Study in the Cyber-Physical Production Systems Domain,” , doi: 10.5281/ZENODO.6388741. Available: https://zenodo.org/record/6388741.
[11]: Kristof Meixner, Kevin Feichtinger, Rick Rabiser, Stefan Biffl, “Efficient Production Process Variability Exploration,” in VaMoS ’22: 16th International Working Conference on Variability Modelling of Software-Intensive Systems, Florence Italy, , pp. 1-9, doi: 10.1145/3510466.3511274. Available: https://dl.acm.org/doi/10.1145/3510466.3511274.
[12]: Kristof Meixner, Jurgen Musil, Arndt Luder, Dietmar Winkler, Stefan Biffl, “A Coordination Artifact for Multi-disciplinary Reuse in Production Systems Engineering,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany, , pp. 1-8, doi: 10.1109/ETFA52439.2022.9921586. Available: https://ieeexplore.ieee.org/document/9921586/.
[13]: Stefan Bachhofner, Kabul Kurniawan, Elmar Kiesling, Kate Revoredo, Dina Bayomie, “Knowledge Graph Supported Machine Parameterization for the Injection Moulding Industry,” vol. 1686, Cham, 2022, pp. 106-120. Available: https://link.springer.com/10.1007/978-3-031-21422-6_8.
[14]: Dina Bayomie, Kate Revoredo, Stefan Bachhofner, Kabul Kurniawan, Elmar Kiesling, Jan Mendling, “Analyzing Manufacturing Process By Enabling Process Mining on Sensor Data,” in PoEM, vol. 3298, London, UK, 2022. Available: https://ceur-ws.org/Vol-3298/paper\_DTE\_625.pdf.
[15]: Dietmar Winkler, Serafima Sherstneva, Stefan Biffl, “Towards Multi-View Test Specification in CPPS Engineering,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany, , pp. 1-4, doi: 10.1109/ETFA52439.2022.9921658. Available: https://ieeexplore.ieee.org/document/9921658/.
[16]: Walid Fdhila, David Knuplesch, Stefanie Rinderle-Ma, Manfred Reichert, “Verifying compliance in process choreographies: Foundations, algorithms, and implementation,” Information Systems, vol. 108, , p. 101983, doi: 10.1016/j.is.2022.101983. Available: https://www.sciencedirect.com/science/article/pii/S0306437922000023.
[17]: Patrick Denzler, Mohammad Ashjaei, Thomas Frühwirth, Victor Nicholas Ebirim, Wolfgang Kastner, “Concurrent OPC UA information model access, enabling real-time OPC UA PubSub,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany, , pp. 1-4, doi: 10.1109/ETFA52439.2022.9921438. Available: https://ieeexplore.ieee.org/document/9921438/.
[18]: Patrick Denzler, Thomas Frühwirth, Daniel Scheuchenstuhl, Martin Schoeberl, Wolfgang Kastner, “Timing Analysis of TSN-Enabled OPC UA PubSub,” in 2022 IEEE 18th International Conference on Factory Communication Systems (WFCS), Pavia, Italy, , pp. 1-8, doi: 10.1109/WFCS53837.2022.9779177. Available: https://ieeexplore.ieee.org/document/9779177/.
[19]: Felix Rinker, Kristof Meixner, Sebastian Kropatschek, Elmar Kiesling, Stefan Biffl, “Risk and Engineering Knowledge Integration in Cyber-physical Production Systems Engineering,” in 2022 48th Euromicro Conference on Software Engineering and Advanced Applications (SEAA), Gran Canaria, Spain, , pp. 338-345, doi: 10.1109/SEAA56994.2022.00060. Available: https://ieeexplore.ieee.org/document/10011513/.
[20]: Stefan Biffl, Sebastian Kropatschek, Elmar Kiesling, Kristof Meixner, Arndt Luder, “Risk-Driven Derivation of Operation Checklists from Multi-Disciplinary Engineering Knowledge,” in 2022 IEEE 20th International Conference on Industrial Informatics (INDIN), Perth, Australia, , pp. 7-14, doi: 10.1109/INDIN51773.2022.9976096. Available: https://ieeexplore.ieee.org/document/9976096/.
[21]: Sebastian Kropatschek, Oskar Gert, Iman Ayatollahi, Kristof Meixner, Elmar Kiesling, Alexander Steigberger, Arndt Luder, Stefan Biffl, “Designing a Digital Shadow for Efficient, Low-Delay Analysis of Production Quality Risk,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany, , pp. 1-8, doi: 10.1109/ETFA52439.2022.9921582. Available: https://ieeexplore.ieee.org/document/9921582/.
[22]: Simon Rädler, Juergen Mangler, Eugen Rigger, “Requirements for Manufacturing Data Collection to Enable Data-Driven Design,” in 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, vol. 112, Gulf of Naples, Italy, 2022, pp. 232-237, doi: https://doi.org/10.1016/j.procir.2022.09.077. Available: https://www.sciencedirect.com/science/article/pii/S2212827122012409.
[23]: Simon Rädler, Eugen Rigger, Juergen Mangler, Stefanie Rinderle-Ma, “Integration of Machine Learning Task Definition in Model-Based Systems Engineering using SysML,” in 2022 IEEE International Conference on Industrial Informatics (INDIN), Perth, Australia, , pp. 546-551, doi: 10.1109/INDIN51773.2022.9976107. Available: https://ieeexplore.ieee.org/abstract/document/9976107?casa_token=NKnGb37ZBloAAAAA:7JO41Ay3KlNPnlj69mNG2WiZv_Cy9pjc9JlMgBDv-r4vMqaoxymeVfD3FX9tJrfdi1hTrrNIcjU.
[24]: Dieter Etz, Patrick Denzler, Thomas Frühwirth, Wolfgang Kastner, “Functional Safety Use Cases in the Context of Reconfigurable Manufacturing Systems,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), , pp. 1-8, doi: 10.1109/ETFA52439.2022.9921448.
[25]: Sascha Gent, Oskar Gert, Paul Schörghofer, Christoph Ramsauer, Friedrich Bleicher, Norbert Leder, Riccardo Fernandez Gutiérrez, Florian Reiterer, “Maintenance interval monitoring and cutting edge breakout detection using an instrumented tool,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, , doi: 10.1109/ETFA52439.2022.9921282. Available: https://ieeexplore.ieee.org/document/9921282.
[26]: Arndt Lüder, Kristof Meixner, Stefan Biffl, “Engineering Data Treasures, Their Collection and Use,” IFAC-PapersOnLine, vol. 55, , pp. 2623-2628, doi: 10.1016/j.ifacol.2022.10.105. Available: https://www.sciencedirect.com/science/article/pii/S2405896322021140.
[27]: Felix Rinker, Sebastian Kropatschek, Thorsten Steuer, Kristof Meixner, Elmar Kiesling, Arndt Lüder, Dietmar Winkler, Stefan Biffl, “Efficient Multi-view Change Management in Agile Production Systems Engineering,” in 24th International Conference on Enterprise Information Systems, , pp. 134-141. Available: https://www.scitepress.org/Link.aspx?doi=10.5220/0011074000003179.
[28]: Stefan Biffl, Kristof Meixner, David Hoffmann, Jürgen Musil, Hossein Rahmani, Arndt Lüder, “Towards Coordinating Production Reconfiguration,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), , pp. 1-4, doi: 10.1109/ETFA52439.2022.9921665.
[29]: Matthias Sarna, Sofia Espericueta, Arndt Lüder, “Balanced Selection in Industrial Bin Picking,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), , pp. 1-4, doi: 10.1109/ETFA52439.2022.9921543.
[30]: David Hoffmann, Stefan Biffl, Kristof Meixner, Arndt Lüder, “Towards Design Patterns for Production Security,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), , pp. 1-4, doi: 10.1109/ETFA52439.2022.9921691.
[31]: Matthias Sarna, Vamsi Sure, Arndt Lüder, Jens Weist, “Formed Workpieces in Industrial Bin Picking,” in 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), , pp. 1-4, doi: 10.1109/ETFA52439.2022.9921563.
[32]: Amolkirat Singh Mangat, Stefanie Rinderle-Ma, “Next-Activity Prediction for Non-stationary Processes with Unseen Data Variability,” in Enterprise Design, Operations, and Computing, Cham, 2022, pp. 145-161, doi: 10.1007/978-3-031-17604-3_9.
[33]: Beate Scheibel, Stefanie Rinderle-Ma, “Online Decision Mining and Monitoring in Process-Aware Information Systems,” in Conceptual Modeling, Cham, 2022, pp. 271-280, doi: 10.1007/978-3-031-17995-2_19.
[34]: A. Agovic, T. Trautner, F. Bleicher, “Digital Transformation – Implementation of Drawingless Manufacturing: A Case Study,” Procedia CIRP, vol. 107, 2022, pp. 1479-1484, doi: 10.1016/j.procir.2022.05.178. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827122004620.
[35]: G. Mauthner, W. Votruba, C. Ramsauer, L. Plessing, T. Trautner, F. Bleicher, “Development of a CAM-in-the-Loop System for Cutting Parameter Optimization using an Instrumented Tool Holder,” Procedia CIRP, vol. 107, 2022, pp. 326-331, doi: 10.1016/j.procir.2022.04.053. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827122002694.
[36]: S. Rädler, E. Rigger, “A Survey on the Challenges Hindering the Application of Data Science, Digital Twins and Design Automation in Engineering Practice,” in Proceedings of the Design Society, vol. 2, , pp. 1699-1708, doi: 10.1017/pds.2022.172.
[37]: Samuel Bitrus, Harald Fitzek, Eugen Rigger, Johannes Rattenberger, Doris Entner, “Enhancing classification in correlative microscopy using multiple classifier systems with dynamic selection,” Ultramicroscopy, 2022, p. 113567, doi: https://doi.org/10.1016/j.ultramic.2022.113567. Available: https://www.sciencedirect.com/science/article/pii/S0304399122000985.
[38]: Beate Scheibel, Stefanie Rinderle-Ma, “Decision Mining with Time Series Data Based on Automatic Feature Generation,” in Advanced Information Systems Engineering, Cham, 2022, pp. 3-18, doi: 10.1007/978-3-031-07472-1_1.
[39]: Johannes Diebold, Gerhard Wiesinger, Friedrich Bleicher, “Horizontal bandsawing of Inconel 718: The influence of parameter variations and wear on bandsawing deviations,” Materials Today: Proceedings, , p. S2214785322027535, doi: 10.1016/j.matpr.2022.04.589. Available: https://linkinghub.elsevier.com/retrieve/pii/S2214785322027535.
[40]: Sebastian Kropatschek, Thorsten Steuer, Elmar Kiesling, Kristof Meixner, Iman Ayatollahi, Patrik Sommer, Stefan Biffl, “Analysis of Quality Issues in Production With Multi-view Coordination Assets,” in IFAC MIM (in press), 2022.
[41]: Eugen Rigger, Kristina Shea, Tino Stanković, “Method for identification and integration of design automation tasks in industrial contexts,” Advanced Engineering Informatics, vol. 52, , p. 101558, doi: 10.1016/j.aei.2022.101558. Available: https://linkinghub.elsevier.com/retrieve/pii/S1474034622000325.

2021 [BibTeX]

[1]: Matthias Sarna, Kristof Meixner, Stefan Biffl, Arndt Luder, “Reducing Risk in Industrial Bin Picking With PPRS Configuration and Dependency Management,” in 2021 IEEE 26th International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden, , pp. 1-4, doi: 10.1109/ETFA45728.2021.9613618. Available: https://ieeexplore.ieee.org/document/9613618/.
[2]: Dietmar Winkler, Petr Novak, Kristof Meixner, Jiri Vyskocil, Felix Rinker, Stefan Biffl, “Product-Process-Resource Asset Networks as Foundation for Improving CPPS Engineering,” in 2021 IEEE 26th International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden, , pp. 1-4, doi: 10.1109/ETFA45728.2021.9613253. Available: https://ieeexplore.ieee.org/document/9613253/.
[3]: Kristof Meixner, Arndt Lüder, Jan Herzog, Dietmar Winkler, Stefan Biffl, “Patterns for Reuse in Production Systems Engineering,” International Journal of Software Engineering and Knowledge Engineering, vol. 31, , pp. 1623-1659, doi: 10.1142/S0218194021400155. Available: https://www.worldscientific.com/doi/abs/10.1142/S0218194021400155.
[4]: Stefan Biffl, Arndt Lüder, Kristof Meixner, Felix Rinker, Matthias Eckhart, Dietmar Winkler, “Multi-view-Model Risk Assessment in Cyber-Physical Production Systems Engineering:,” in 9th International Conference on Model-Driven Engineering and Software Development, Online Streaming, — Select a Country —, , pp. 163-170, doi: 10.5220/0010224801630170. Available: https://www.scitepress.org/DigitalLibrary/Link.aspx?doi=10.5220/0010224801630170.
[5]: Arndt Luder, Kristof Meixner, Anna-Kristin Behnert, Stefan Biffl, “Modelling Engineered Object Dependencies in an AutomationML-based Tool Chain,” in 2021 IEEE 26th International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden, , pp. 01-04, doi: 10.1109/ETFA45728.2021.9613530. Available: https://ieeexplore.ieee.org/document/9613530/.
[6]: Anna-Kristin Behnert, Felix Rinker, Arndt Luder, Stefan Biffl, “Migrating Engineering Tools Towards an AutomationML-Based Engineering Pipeline,” in 2021 IEEE 19th International Conference on Industrial Informatics (INDIN), Palma de Mallorca, Spain, , pp. 1-7, doi: 10.1109/INDIN45523.2021.9557517. Available: https://ieeexplore.ieee.org/document/9557517/.
[7]: Stefan Bachhofner, Elmar Kiesling, Kabul Kurniawan, Emanuel Sallinger, Philipp Waibel, “Knowledge Graph Modularization for Cyber-Physical Production Systems,” in International Semantic Web Conference (ISWC) 2021: Posters, Demos, and Industry Tracks, vol. 2980, Virtual Conference, October, . Available: https://ceur-ws.org/Vol-2980/#paper333.
[8]: Felix Rinker, Kristof Meixner, Laura Waltersdorfer, Dietmar Winkler, Arndt Luder, Stefan Biffl, “Towards Efficient Generation of a Multi-Domain Engineering Graph with Common Concepts,” in 2021 IEEE 26th International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden, , pp. 1-4, doi: 10.1109/ETFA45728.2021.9613657. Available: https://ieeexplore.ieee.org/document/9613657/.
[9]: Stefan Biffl, Kristof Meixner, Dietmar Winkler, Arndt Luder, “Towards Efficient Asset-Based Configuration Management with a PPR Asset Directory,” in 2021 IEEE 26th International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden, , pp. 1-4, doi: 10.1109/ETFA45728.2021.9613200. Available: https://ieeexplore.ieee.org/document/9613200/.
[10]: Dietmar Winkler, Petr Novak, Jiri Vyskocil, Kristof Meixner, Stefan Biffl, “Industry 4.0 Asset-based Risk Mitigation for Production Operation,” in 2021 IEEE 17th International Conference on Automation Science and Engineering (CASE), Lyon, France, , pp. 278-285, doi: 10.1109/CASE49439.2021.9551419. Available: https://ieeexplore.ieee.org/document/9551419/.
[11]: Felix Paul Rinker, Sebastian Kropatschek, Thorsten Steuer, Elmar Kiesling, Kristof Meixner, Patrick Sommer, Arndt Lüder, Dietmar Winkler, Stefan Biffl, “Efficient FMEA Re-Validation: Multi-view Model Integration in Agile Production Systems Engineering,” . Available: https://repositum.tuwien.at/handle/20.500.12708/19984.
[12]: Felix Rinker, Laura Waltersdorfer, Kristof Meixner, Dietmar Winkler, Arndt Lüder, Stefan Biffl, “Continuous Integration in Multi-view Modeling: A Model Transformation Pipeline Architecture for Production Systems Engineering:,” in 9th International Conference on Model-Driven Engineering and Software Development, Online Streaming, — Select a Country —, , pp. 286-293, doi: 10.5220/0010309902860293. Available: https://www.scitepress.org/DigitalLibrary/Link.aspx?doi=10.5220/0010309902860293.
[13]: Dietmar Winkler, Alexander Korobeinykov, Petr Novak, Arndt Luder, Stefan Biffl, “Big Data Needs and Challenges in Smart Manufacturing: An Industry-Academia Survey,” in 2021 IEEE 26th International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden, , pp. 1-8, doi: 10.1109/ETFA45728.2021.9613600. Available: https://ieeexplore.ieee.org/document/9613600/.
[14]: Stefan Biffl, Juergen Musil, Angelika Musil, Kristof Meixner, Arndt Luder, Felix Rinker, Danny Weyns, Dietmar Winkler, “An Industry 4.0 Asset-Based Coordination Artifact for Production Systems Engineering,” in 2021 IEEE 23rd Conference on Business Informatics (CBI), Bolzano, Italy, , pp. 92-101, doi: 10.1109/CBI52690.2021.00020. Available: https://ieeexplore.ieee.org/document/9610733/.
[15]: Kevin Feichtinger, Kristof Meixner, Rick Rabiser, Stefan Biffl, “A Systematic Study as Foundation for a Variability Modeling Body of Knowledge,” in 2021 47th Euromicro Conference on Software Engineering and Advanced Applications (SEAA), Palermo, Italy, , pp. 25-28, doi: 10.1109/SEAA53835.2021.00012. Available: https://ieeexplore.ieee.org/document/9582581/.
[16]: Kristof Meixner, Kevin Feichtinger, Rick Rabiser, Stefan Biffl, “A reusable set of real-world product line case studies for comparing variability models in research and practice,” in SPLC ’21: 25th ACM International Systems and Software Product Line Conference, Leicester United Kindom, , pp. 105-112, doi: 10.1145/3461002.3473946. Available: https://dl.acm.org/doi/10.1145/3461002.3473946.
[17]: Kristof Meixner, Felix Rinker, Hannes Marcher, Jakob Decker, Stefan Biffl, “A Domain-Specific Language for Product-Process-Resource Modeling,” in 2021 IEEE 26th International Conference on Emerging Technologies and Factory Automation (ETFA), Vasteras, Sweden, , pp. 1-8, doi: 10.1109/ETFA45728.2021.9613674. Available: https://ieeexplore.ieee.org/document/9613674/.
[18]: Juergen Mangler, Konrad Diwol, Dieter Etz, Stefanie Rinderle-Ma, Alois Ferscha, Gerald Reiner, Wolfgang Kastner, Sebastien Bougain, Christoph Pollak, Michael Haslgrübler, “Sustainability Through Cognition Aware Safety Systems — Next Level Human-Machine-Interaction,” . Available: http://arxiv.org/abs/2110.07003.
[19]: Tobias Herbert, Juergen Mangler, Stefanie Rinderle-Ma, “Generating Reliable Process Event Streams and Time Series Data Based on Neural Networks,” in Enterprise, Business-Process and Information Systems Modeling, Cham, , pp. 81-95, doi: 10.1007/978-3-030-79186-5_6.
[20]: Matthias Ehrendorfer, Juergen Mangler, Stefanie Rinderle-Ma, “Assessing the Impact of Context Data on Process Outcomes During Runtime,” in Service-Oriented Computing, Cham, , pp. 3-18, doi: 10.1007/978-3-030-91431-8_1.
[21]: Alexandra Birkmaier, Bernhard Oberegger, Andreas Felsberger, Gerald Reiner, Wilfried Sihn, “Towards a robust digital production and logistics network by implementing flexibility measures,” in Procedia CIRP, vol. 104, , pp. 1310-1315, doi: 10.1016/j.procir.2021.11.220. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827121011185.
[22]: Patrick Denzler, Siegfried Hollerer, Thomas Frühwirth, Wolfgang Kastner, “Identification of security threats, safety hazards, and interdependencies in industrial edge computing,” in 2021 IEEE/ACM Symposium on Edge Computing (SEC), , pp. 397-402, doi: 10.1145/3453142.3493508.
[23]: Anselm Klose, Florian Pelzer, Dieter Etz, Diana Strutzenberger, Thomas Frühwirth, Wolfgang Kastner, Leon Urbas, “Building Blocks for Flexible Functional Safety in Discrete Manufacturing and Process Industries,” in 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), , pp. 1-8, doi: 10.1109/ETFA45728.2021.9613608. Available: https://ieeexplore.ieee.org/document/9613608.
[24]: Patrick Denzler, Thomas Frühwirth, Andreas Kirchberger, Martin Schoeberl, Wolfgang Kastner, “Static Timing Analysis of OPC UA PubSub,” in 2021 17th IEEE International Conference on Factory Communication Systems (WFCS), , pp. 167-174, doi: 10.1109/WFCS46889.2021.9483614. Available: https://ieeexplore.ieee.org/document/9483614.
[25]: Florian Stertz, Juergen Mangler, Beate Scheibel, Stefanie Rinderle-Ma, “Expectations vs. Experiences – Process Mining in Small and Medium Sized Manufacturing Companies,” in Business Process Management Forum, Cham, , pp. 195-211, doi: 10.1007/978-3-030-85440-9_12.
[26]: Peter Haiss, Bernhard Mahlberg, Daniel Michlits, “Industry 4.0–the future of Austrian jobs,” Empirica, vol. 48, , pp. 5-36, doi: 10.1007/s10663-020-09497-z. Available: https://doi.org/10.1007/s10663-020-09497-z.
[27]: Christoph Ramsauer, Friedrich Bleicher, “New method for determining single cutting edge breakage of a multi-tooth milling tool based on acceleration measurements of an instrumented tool holder,” Journal of Machine Engineering, vol. Vol. 21, No. 1, , doi: 10.36897/jme/131918. Available: http://yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-96da055e-5730-4bd0-b68a-6f694a2856e4.
[28]: Sebastian Kropatschek, Thorsten Steuer, Elmar Kiesling, Kristof Meixner, Thomas Frühwirth, Patrik Sommer, Daniel Schachinger, Stefan Biffl, “Towards the Representation of Cross-Domain Quality Knowledge for Efficient Data Analytics,” in 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), , pp. 01-04, doi: 10.1109/ETFA45728.2021.9613406.
[29]: G. Mauthner, M. Ehrendorfer, T. Trautner, C. Ramsauer, D. Plakhotnik, F. Bleicher, “Method for Data-Driven NC-Code Optimization based on Dexel Material Removal Simulation and Tool Holder Vibration Measurements,” Procedia CIRP, vol. 104, , pp. 1131-1136, doi: 10.1016/j.procir.2021.11.190. Available: https://linkinghub.elsevier.com/retrieve/pii/S221282712101088X.
[30]: Manuel Gall, Stefanie Rinderle-Ma, “Evaluating Compliance State Visualizations for Multiple Process Models and Instances,” in Business Process Management Forum, Cham, , pp. 126-142, doi: 10.1007/978-3-030-85440-9_8.
[31]: Jan Werner, Mohamed Aburaia, Alexander Raschendorfer, Maximilian Lackner, “MeshSlicer: A 3D-Printing software for printing 3D-models with a 6-axis industrial robot,” Procedia CIRP, vol. 99, , pp. 110-115, doi: 10.1016/j.procir.2021.03.018. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827121002778.
[32]: Clemens Sulz, Jens Brier, Amir Agovic, Friedrich Bleicher, “Investigation of the thermal compensation behaviour of zero-point clamping systems,” Procedia CIRP, vol. 99, , pp. 69-74, doi: 10.1016/j.procir.2021.03.030. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827121003000.
[33]: Thomas Trautner, Iman Ayatollahi, Diana Strutzenberger, Thomas Frühwirth, Florian Pauker, Burkhard Kittl, “Behavioral modeling of manufacturing skills in OPC UA for automated execution by an independent cell controller,” Procedia CIRP, vol. 99, , pp. 633-638, doi: 10.1016/j.procir.2021.03.085. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827121003760.
[34]: Diana Viktoria Strutzenberger, Juergen Mangler, Stefanie Rinderle-Ma, “BPMN Extensions for Modeling Continuous Processes,” in Intelligent Information Systems, Cham, , pp. 20-28, doi: 10.1007/978-3-030-79108-7_3.
[35]: Diana Strutzenberger, Ronald Hinterbichler, Florian Pauker, Thomas Frühwirth, “Information model for human-machine (tool) interaction,” Procedia CIRP, vol. 99, , pp. 98-103, doi: 10.1016/j.procir.2021.03.016. Available: https://www.sciencedirect.com/science/article/pii/S2212827121002754.
[36]: Georg Weichhart, Juergen Mangler, Alexander Raschendorfer, Christoph Mayr-Dorn, Christian Huemer, Alexander Haemmerle, Andreas Pichler, “An adaptive system-of-systems approach for resilient manufacturing,” e & i Elektrotechnik und Informationstechnik, vol. 138, , pp. 341-348, doi: 10.1007/s00502-021-00912-2. Available: https://link.springer.com/10.1007/s00502-021-00912-2.
[37]: Beate Scheibel, Stefanie Rinderle-Ma, “Comparing decision mining approaches with regard to the meaningfulness of their results,” arXiv:2109.07335 [cs], , doi: test. Available: http://arxiv.org/abs/2109.07335.
[38]: Matthias Ehrendorfer, Juergen Mangler, Stefanie Rinderle-Ma, “Sensor Data Stream Selection and Aggregation for the Ex Post Discovery of Impact Factors on Process Outcomes,” in International Conference on Advanced Information System Engineering (CAiSE), Cham, , pp. 29-37, doi: 10.1007/978-3-030-79108-7_4.
[39]: Dieter Etz, Wolfgang Kastner, “Human Control of Self-Organizing Safety Systems,” in 2020 2nd International Conference on Societal Automation (SA), , pp. 1-7, doi: 10.1109/SA51175.2021.9507109. Available: https://ieeexplore.ieee.org/document/9507109.
[40]: Christian Nigischer, Sébastien Bougain, Rainer Riegler, Heinz Peter Stanek, Manfred Grafinger, “Multi-domain simulation utilizing SysML: state of the art and future perspectives,” in 31st CIRP Design Conference 2021 (CIRP Design 2021), vol. 100, Twente, NL, , pp. 319-324, doi: 10.1016/j.procir.2021.05.073. Available: https://www.sciencedirect.com/science/article/pii/S2212827121005382.
[41]: Florian Pauker, Juergen Mangler, Stefanie Rinderle-Ma, Matthias Ehrendorfer, “Industry 4.0 Integration Assessment and Evolution at EVVA GmbH: Process-Driven Automation Through centurio.work,” . Available: https://www.springerprofessional.de/industry-4-0-integration-assessment-and-evolution-at-evva-gmbh-p/19543524.
[42]: Patrick Denzler, Thomas Frühwirth, Andreas Kirchberger, Martin Schoeberl, Wolfgang Kastner, “Experiences from Adjusting Industrial Software for Worst-Case Execution Time Analysis,” in 2021 IEEE 24th International Symposium on Real-Time Distributed Computing (ISORC), , pp. 62-70, doi: 10.1109/ISORC52013.2021.00019. Available: https://ieeexplore.ieee.org/document/9470243.
[43]: Beate Scheibel, Juergen Mangler, Stefanie Rinderle-Ma, “Extraction of dimension requirements from engineering drawings for supporting quality control in production processes,” Computers in Industry, vol. 129, , p. 103442, doi: 10.1016/j.compind.2021.103442. Available: https://www.sciencedirect.com/science/article/pii/S016636152100049X.
[44]: Amolkirat Singh Mangat, Juergen Mangler, Stefanie Rinderle-Ma, “Interactive Process Automation based on lightweight object detection in manufacturing processes,” Computers in Industry, vol. 130, , p. 103482, doi: 10.1016/j.compind.2021.103482. Available: https://www.sciencedirect.com/science/article/pii/S0166361521000890.

2020 [BibTeX]

[1]: Sébastien Bougain, Detlef Gerhard, “Supporting product design decision with a SysML design history Assistant,” Procedia CIRP, vol. 91, 2020, pp. 255-260, doi: 10.1016/j.procir.2020.02.174. Available: https://www.sciencedirect.com/science/article/pii/S2212827120308167.
[2]: Pirmin Schwarenthorer, Alfred Taudes, Johannes Hunschofsky, Christoph Magnet, Martin Tschandl, “Increased Company Performance Through Macroeconomics Sales Forecasting: A Case Study,” Journal of Japanese Operations Management and Strategy, vol. 10, 2020, pp. 1-17, doi: 10.20586/joms.10.1_1.
[3]: Florian Stertz, Karolin Winter, Stefanie Rinderle-Ma, “SVIPEX: A Web Service for Discovering and Visualizing Instance Spanning Constraints based on Process Execution Logs,” in Int’l Conference on Business Process Management 2020, Sevilla, Spain, , pp. 117-121. Available: http://eprints.cs.univie.ac.at/6511/.
[4]: Florian Stertz, Juergen Mangler, Stefanie Rinderle-Ma, “Data-driven Improvement of Online Conformance Checking,” in 2020 IEEE 24th International Enterprise Distributed Object Computing Conference (EDOC), , pp. 187-196, doi: 10.1109/EDOC49727.2020.00031.
[5]: Florian Stertz, Jürgen Mangler, Stefanie Rinderle-Ma, “Balancing Patient Care and Paperwork Automatic Task Enactment and Comprehensive Documentation in Treatment Processes,” vol. 15, , pp. 11:1-28. Available: http://eprints.cs.univie.ac.at/6582/.
[6]: Eugen Rigger, Thomas Vosgien, Samuel Bitrus, Piroska Szabo, Benoit Eynard, “Enterprise Architecture Method for Continuous Improvement of PLM Based on Process Mining,” in Product Lifecycle Management Enabling Smart X, Cham, 2020, pp. 563-575, doi: 10.1007/978-3-030-62807-9_45.
[7]: Simon Rädler, Eugen Rigger, “Participative Method to Identify Data-Driven Design Use Cases,” in Product Lifecycle Management Enabling Smart X, Cham, 2020, pp. 680-694, doi: 10.1007/978-3-030-62807-9_54.
[8]: Bitrus Samuel, Velkavrh Igor, Rigger Eugen, “Applying an Adapted Data Mining Methodology (DMME) to a Tribological Optimisation Problem,” 2020. Available: https://www.springerprofessional.de/applying-an-adapted-data-mining-methodology-dmme-to-a-tribologic/18729716.
[9]: Pablo Gutierrez Peon, Wilfried Steiner, Elisabeth Uhlemann, “Network Fault Tolerance by Means of Diverse Physical Layers,” in 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Vienna, Austria, , pp. 1697-1704, doi: 10.1109/ETFA46521.2020.9212131. Available: https://ieeexplore.ieee.org/document/9212131/.
[10]: Sascha Gent, Pablo Gutiérrez Peón, Thomas Frühwirth, Dieter Etz, “Hosting functional safety applications in factory networks through Time-Sensitive Networking,” in 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), vol. 1, , pp. 230-237, doi: 10.1109/ETFA46521.2020.9212024.
[11]: Manuel Gall, Stefanie Rinderle-Ma, “Assessing Process Attribute Visualization and Interaction Approaches Based on a Controlled Experiment,” International Journal of Cooperative Information Systems, vol. 29, , doi: 10.1142/S0218843020500070.
[12]: Karolin Winter, Florian Stertz, Stefanie Rinderle-Ma, “Discovering instance and process spanning constraints from process execution logs,” Information Systems, vol. 89, 2020, p. 101484, doi: 10.1016/j.is.2019.101484. Available: https://www.sciencedirect.com/science/article/pii/S0306437919305368.
[13]: Florian Stertz, Stefanie Rinderle-Ma, Juergen Mangler, “Analyzing Process Concept Drifts Based on Sensor Event Streams During Runtime,” in Business Process Management, Cham, 2020, pp. 202-219, doi: 10.1007/978-3-030-58666-9_12.
[14]: Dieter Etz, Hannes Brantner, Wolfgang Kastner, “Smart Manufacturing Retrofit for Brownfield Systems,” Procedia Manufacturing, vol. 42, 2020, pp. 327-332, doi: 10.1016/j.promfg.2020.02.085. Available: https://www.sciencedirect.com/science/article/pii/S2351978920306508.
[15]: Dieter Etz, Thomas Frühwirth, Wolfgang Kastner, “Self-Configuring Safety Networks,” 2020, pp. 232-245. Available: https://www.springerprofessional.de/self-configuring-safety-networks/17563062.
[16]: Dieter Etz, Thomas Frühwirth, Wolfgang Kastner, “Flexible Safety Systems for Smart Manufacturing,” in 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), vol. 1, , pp. 1123-1126, doi: 10.1109/ETFA46521.2020.9211905.

2019 [BibTeX]

[1]: Rainer Pamminger, Sebastian Glaser, Roland Ambrosch, Mario Genner, “Upscaling of Collaborative Disassembly Lines for Mobile Phones – Economic and Environmental Considerations,” in Proceedings of the International Symposium for Production Research 2019, Cham, 2020, pp. 442-451, doi: 10.1007/978-3-030-31343-2_39.
[2]: Stefan John, Alexandru Burdusel, Robert Bill, Daniel Struber, Gabriele Taentzer, Steffen Zschaler, Manuel Wimmer, “Searching for Optimal Models: Comparing Two Encoding Approaches,” 12th International Conference on Model Transformations ICMT 2019, , pp. 1-22, doi: 10.5381/jot.2019.18.3.a6. Available: https://kclpure.kcl.ac.uk/portal/en/publications/searching-for-optimal-models(0fcb1cb9-43f6-43ba-b621-5faf3e2ada51).html.
[3]: Daniel Michlits, Bernhard Mahlberg, Peter R. Haiss, “Industry 4.0 – The Future of Austrian Jobs,” Rochester, NY, . Available: https://papers.ssrn.com/abstract=3461525.
[4]: Patrik Koenig, Juergen Mangler, Stefanie Rinderle-Ma, “Compliance Monitoring on Process Event Streams from Multiple Sources,” in 2019 International Conference on Process Mining (ICPM), , pp. 113-120, doi: 10.1109/ICPM.2019.00026.
[5]: Eugen Rigger, Alexander Lutz, Kristina Shea, Tino Stankovic, “Estimating the Impact of Design Automation: The Influence of Knowledge on Potential Estimation,” Proceedings of the Design Society: International Conference on Engineering Design, vol. 1, , pp. 1943-1952, doi: 10.1017/dsi.2019.200. Available: https://www.cambridge.org/core/journals/proceedings-of-the-international-conference-on-engineering-design/article/estimating-the-impact-of-design-automation-the-influence-of-knowledge-on-potential-estimation/6A41F1A71785AD2A957B20B77ADB6437.
[6]: Bernhard Knasmüller, Christoph Hochreiner, Stefan Schulte, “Pathfinder: Fault Tolerance for Stream Processing Systems,” in 2019 IEEE Fifth International Conference on Big Data Computing Service and Applications (BigDataService), , pp. 29-39, doi: 10.1109/BigDataService.2019.00011.
[7]: Olena Skarlat, Vasileios Karagiannis, Thomas Rausch, Kevin Bachmann, Stefan Schulte, “A Framework for Optimization, Service Placement, and Runtime Operation in the Fog,” in 2018 IEEE/ACM 11th International Conference on Utility and Cloud Computing (UCC), , pp. 164-173, doi: 10.1109/UCC.2018.00025.
[8]: Philipp Waibel, Christoph Hochreiner, Stefan Schulte, Agnes Koschmider, Jan Mendling, “ViePEP-C: A Container-Based Elastic Process Platform,” IEEE Transactions on Cloud Computing, vol. 9, , pp. 1657-1674, doi: 10.1109/TCC.2019.2912613.
[9]: Thomas Hießl, Christoph Hochreiner, Stefan Schulte, “Towards a Framework for Data Stream Processing in the Fog,” Informatik Spektrum, vol. 42, , pp. 256-265, doi: 10.1007/s00287-019-01192-z. Available: https://doi.org/10.1007/s00287-019-01192-z.
[10]: Michael Borkowski, Christoph Hochreiner, Stefan Schulte, “Minimizing cost by reducing scaling operations in distributed stream processing,” Proceedings of the VLDB Endowment, vol. 12, 2019, p. 724–737, doi: 10.14778/3317315.3317316. Available: https://doi.org/10.14778/3317315.3317316.
[11]: Michaela Murauer, Florian Jungwirth, Bernhard Anzengruber, Ali Abbas, Abdelrahman Ahmad, Behrooz Azadi, Jullius Cho, Helmut Ennsbrunner, Alois Ferscha, Detlef Gerhard, Benedikt Gollan, Michael Haslgrübler, Johannes Selymes, Georgios Sopidis, Matthias Stütz, Paul Weißenbach, “A task-independent design and development process for cognitive products in industrial applications,” in Proceedings of the 12th ACM International Conference on PErvasive Technologies Related to Assistive Environments, New York, NY, USA, 2019, p. 358–367, doi: 10.1145/3316782.3322748. Available: https://doi.org/10.1145/3316782.3322748.
[12]: Alexander Raschendorfer, Michael Hofmann, F Pauker, M Kunz, M Fuschlberger, “Adaptive Loading Station for High-Mix Production Systems,” , doi: 10.3217/978-3-85125-663-5-13.
[13]: M. Messner, F. Pauker, G. Mauthner, T. Frühwirth, J. Mangler, “Closed Loop Cycle Time Feedback to Optimize High-Mix / Low-Volume Production Planning,” Procedia CIRP, vol. 81, 2019, pp. 689-694, doi: 10.1016/j.procir.2019.03.177. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827119304822.
[14]: Paul Schörghofer, Florian Pauker, Jürgen Mangler, Christoph Ramsauer, Friedrich Bleicher, “Using sensory tool holder data for optimizing production processes,” Journal of Machine Engineering, vol. 2019;19(3), , pp. 43-55, doi: 10.5604/01.3001.0013.4079. Available: https://jme.publisherspanel.com/resources/html/article/details?id=192095&language=en.
[15]: Solmaz Mansour Fallah, Thomas Trautner, Florian Pauker, “Integrated tool lifecycle,” Procedia CIRP, vol. 79, 2019, pp. 257-262, doi: 10.1016/j.procir.2019.02.060. Available: https://linkinghub.elsevier.com/retrieve/pii/S2212827119301763.
[16]: Diana Strutzenberger, Thomas Frühwirth, Thomas Trautner, Ronald Hinterbichler, Florian Pauker, “Communication interface specification in OPC UA,” in 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain, , pp. 1329-1332, doi: 10.1109/ETFA.2019.8869383. Available: https://ieeexplore.ieee.org/document/8869383/.
[17]: Jürgen Mangler, Florian Pauker, Stefanie Rinderle-Ma, Matthias Ehrendorfer, “centurio.work – Industry 4.0 Integration Assessment and Evolution,” in 17th Int’l Conference on Business Process Management, Vienna, 2019, pp. 106-117. Available: http://eprints.cs.univie.ac.at/6099/.
[18]: Matthias Ehrendorfer, Juergen-Albrecht Fassmann, Juergen Mangler, Stefanie Rinderle-Ma, “Combining Conformance Checking and Classification of XES Log Data for the Manufacturing Domain,” arXiv preprint arXiv:1904.05883, 2019.
[19]: Matthias Ehrendorfer, Juergen-Albrecht Fassmann, Juergen Mangler, Stefanie Rinderle-Ma, “Conformance Checking and Classification of Manufacturing Log Data,” in 2019 IEEE 21st Conference on Business Informatics (CBI), vol. 01, , pp. 569-577, doi: 10.1109/CBI.2019.00072.
[20]: Florian Stertz, Stefanie Rinderle-Ma, “Detecting and Identifying Data Drifts in Process Event Streams Based on Process Histories,” in Information Systems Engineering in Responsible Information Systems, Cham, 2019, pp. 240-252, doi: 10.1007/978-3-030-21297-1_21.

2018 [BibTeX]

[1]: Philipp Waibel, Svetoslav Videnov, Michael Borkowski, Christoph Hochreiner, Stefan Schulte, Jan Mendling, “Process Simulation for Machine Reservation in Cloud Manufacturing,” in 2018 IEEE 16th International Conference on Industrial Informatics (INDIN), , pp. 270-277, doi: 10.1109/INDIN.2018.8472038.
[2]: Stefan Thalmann, Juergen Mangler, Tobias Schreck, Christian Huemer, Marc Streit, Florian Pauker, Georg Weichhart, Stefan Schulte, Christian Kittl, Christoph Pollak, Matej Vukovic, Gerti Kappel, Milot Gashi, Stefanie Rinderle-Ma, Josef Suschnigg, Nikolina Jekic, Stefanie Lindstaedt, “Data Analytics for Industrial Process Improvement A Vision Paper,” in 2018 IEEE 20th Conference on Business Informatics (CBI), vol. 02, , pp. 92-96, doi: 10.1109/CBI.2018.10051.
[3]: Christian Huemer, Gerti Kappel, Manuel Wimmer, Henderik A. Proper, Siegfried Reich, Wernher Behrendt, Stefan Thalmann, Georg Weichhart, Alois Zoitl, “Interoperability and Integration in Future Production Systems,” in 2018 IEEE 20th Conference on Business Informatics (CBI), vol. 02, , pp. 175-177, doi: 10.1109/CBI.2018.10067.
[4]: Florian Pauker, Juergen Mangler, “centurio.work – Higher Productivity Through Intelligent Connectivity,” vol. 4, 2018.
[5]: Florian Pauker, Jürgen Mangler, Stefanie Rinderle-Ma, Christoph Pollak, “centurio.work – Modular Secure Manufacturing Orchestration,” in 16th International Conference on Business Process Management 2018, Sydney, Australia, , pp. 164-171. Available: http://eprints.cs.univie.ac.at/5770/.
[6]: Dieter Etz, Thomas Frühwirth, Ahmed Ismail, Wolfgang Kastner, “Simplifying functional safety communication in modular, heterogeneous production lines,” in 2018 14th IEEE International Workshop on Factory Communication Systems (WFCS), 2018, pp. 1-4, doi: 10.1109/WFCS.2018.8402371.

2025 [BibTeX]

2024 [BibTeX]

2023 [BibTeX]

2022 [BibTeX]

2021 [BibTeX]

2020 [BibTeX]

2019 [BibTeX]

2018 [BibTeX]

ADRESSE

KONTAKT